Simpson Strong-Tie® AT-XP10 Strong-Rod™ High Strength Acrylic Adhesive, 9.4 oz Coaxial Cartridge, Liquid/Paste, Teal/Tan/White

Simpson Strong-Tie® strong-rod acrylic adhesive, high strength, series: AT-XP®, coaxial cartridge, 9.4 oz, acrylic glass base, composition: (Resin Teal Side)-Portland cement, calcined clay, ethoxylated bisphenol-A dimethacrylate, propylidynetimethyl trimethyl trimethacrylate, crystalline silica, qtz, tetrahydrofurfuryl methacrylate, (Initiator White or Tan Side)-Dibenzoyl peroxide, white mineral oil, titanium dioxide, kaolin, silicon dioxide, liquid/paste, 24 hr curing, teal/white/tan, 1.58 specific gravity, >200°F/159°F flash, 0.417361111111111 mixing, 30 G/L VOC, applicable materials: grouted concrete block, cracked concrete, dry/water saturated concrete and masonry. Formulated for high-strength anchorage of threaded rod and rebar into cracked and uncracked concrete and masonry under a wide range of conditions, AT-XP® adhesive dispenses easily in cold or warm environments and in below-freezing temperatures with no need to warm the cartridge. When mixed properly, this low-odor formula is a dark teal color for easy post-installation identification.

Features

• Passed the demanding ICC-ES AC308 adverse-condition tests pertaining to reduced and elevated temperatures and long-term sustained loads
• Code listed under the IBC/IRC for cracked and uncracked concrete per IAPMO UES ER-263 and City of L. A. RR25960
• Code listed under the IBC/IRC for masonry per IAPMO UES ER-281 and City of L. A. RR25966
• 10:1 two-component high strength, acrylic-based anchoring adhesive
• Easy hole cleaning procedure no power-brushing required
• For best results store between 14 to 80°F
• Cures in substrate temperatures as low as 14°F in 24 hrs or less
• Threaded rod anchoring and rebar doweling into concrete and masonry
• Suitable for horizontal, vertical and overhead applications
• Surfaces to receive adhesive must be clean
• Base material temperature must be 14°F or above at the time of installation
• For best results, material should be 14 to 80°F at time of application
• To warm cold material, store cartridges in a warm, uniformly heated area or storage container
• Do not immerse cartridges in water to facilitate warming
• Mixed material in nozzle can harden in 3 to 4 min at temperatures of 70°F and above
• Use only Simpson Strong-Tie® mixing nozzles in accordance with Simpson Strong-Tie® instructions
• Modification or improper use of mixing nozzle may impair AT-XP® adhesive performance
• 12 months shelf life from date of manufacture in unopened container
• Compatible with CDT10S dispensing tool/AMN19Q mixing nozzle