Dixon® 13MHHM250 Single Pin Heavy Duty Clamp with Wing Nut, 2-1/2 in Tube, 3/4 in Thick, 25 in-lb Load

Dixon® single pin heavy duty clamp with wing nut, 2-1/2 in tube, 3/4 in thick, 25 in-lb load, 304 stainless steel, domestic.

Features

• Wing nut tightened to 25 in-lb of torque
• 400 psi at 70°F and 200 psi at 250°F pressure
• Service pressure ratings are based on the following parameters: matching elastomer gasket and weld ferrules properly aligned and assembled with the clamps tightened to required torques, tests are done hydrostatically with no water hammer or shock loads
• Please note the pressure ratings of the described unions may be above the recommended pipe line operating pressures