# TPI F3317TSRP 3310 1-Phase Fan Forced Heater with In-Built Single Pole Thermostat and Summer Fan Switch, 4.8 kW, 208 VAC, 90°F

**Brand:** [TPI](https://dev.maxsupplyco.com/brands/TPI)
**SKU:** F3317TSRP-13251
**MPN:** F3317TSRP
**Price:** $865 · in stock
**URL:** https://dev.maxsupplyco.com/product/tpi-f3317tsrp

## Features

- Powder coated 18 ga steel front
- Automatic reset thermal limit for safety
- Steel block fin element
- Units with dual wattage, factory wired to highest wattage
- Wattage selectable at time of installation on some models
- Furnish and install electric forced air heaters where specified
- The heaters shall be constructed of a heavy gauge steel housing
- The heaters shall have a low speed 600 rpm motor which drives a vane axial blower to deliver a quiet 175 cfm of down flow air
- The heating element shall be of the sealed block fin type with large, parallel steel fins for quick heat transfer
- Unit shall have a standard thermal overload cutoff for added safety, a fan switch for fan only operation
- The in-built thermostat shall be calibrated to provide a range of 0 to 110°F

## Specifications

| Spec | Value |
|---|---|
| UPC | 686334377782 |
| Brands | TPI |
| Warranty | 1 year limited |
| Width (in) | 17 |
| Height (in) | 6 |
| Length (in) | 21 |
| Manufacturer | TPI Corporation |
| Package Quantity | 1/Each |
| Standard Approvals | ARRA CompliantBuy American Act CompliantcETLus Listed |
| Manufacturer Part Number | F3317TSRP |

## Description

TPI Fan Forced Wall Heater, 1-Phase Standard, Series: 3310, 16380 Btu, 208 VAC, 23 A, 4800 W, 175 cfm, 600 rpm, 90°F, Wall Mount, Steel, Ivory, Powder Coated, 19-15/16 in H x 14-3/16 in W x 4 in D.

Features

- Powder coated 18 ga steel front

- Automatic reset thermal limit for safety

- Steel block fin element

- Units with dual wattage, factory wired to highest wattage

- Wattage selectable at time of installation on some models

- Furnish and install electric forced air heaters where specified

- The heaters shall be constructed of a heavy gauge steel housing

- The heaters shall have a low speed 600 rpm motor which drives a vane axial blower to deliver a quiet 175 cfm of down flow air

- The heating element shall be of the sealed block fin type with large, parallel steel fins for quick heat transfer

- Unit shall have a standard thermal overload cutoff for added safety, a fan switch for fan only operation

- The in-built thermostat shall be calibrated to provide a range of 0 to 110°F