# Starrett® 683-3Z Internal Chamfer Gage, 0 to 1 in Measuring, Graduations 0.001 in, 3-Blade Plunger, 2-19/64 in dia

**Brand:** [STARRETT](https://dev.maxsupplyco.com/brands/STARRETT)
**SKU:** 683-3Z-13162
**MPN:** 683-3Z
**Price:** $514.56 · in stock
**URL:** https://dev.maxsupplyco.com/product/starrett-683-3z

## Features

- When the three blade plunger is pressed against a flat surface, the gage should read the set number stamped on the back of the indicator
- No setting master is necessary
- Internal gages will measure the largest diameter of any chamfer that has an included angle within the range of angles printed on the Dial face
- Gages are also available with electronic indicators on request
- Deluxe padded case
- All ground surfaces are of hardened tool steel
- Indicators are AGD design
- Gages directly measure the diameter of chamfered holes
- For 0 - 90° Dial reading

## Specifications

| Spec | Value |
|---|---|
| UPC | 049659636864 |
| Brands | STARRETT |
| Width (in) | 5.4 |
| Height (in) | 2.4 |
| Length (in) | 7.7 |
| Manufacturer | L.S. Starrett Company |
| Package Quantity | 1/Each |
| Standard Approvals | California Provision: WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm |
| Manufacturer Part Number | 683-3Z |

## Description

Starrett® Chamfer Gage, Internal, Series: 683, 0 to 1 in, Graduations: 0.001 in, 3-Blade Plunger, 2-19/64 in dia x 57/64 in H Dial, White Dial, Hardened Tool Steel. These gages directly measure the diameter of chamfered holes. No setting master is necessary. When the three blade plunger is pressed against a fl at surface, the gage should read the set number stamped on the back of the indicator. In case of wear, the gage may be adjusted to read the proper number. 0 - 1 in range in case of wear, the gage may be adjusted to read the proper number.

Features

- When the three blade plunger is pressed against a flat surface, the gage should read the set number stamped on the back of the indicator

- No setting master is necessary

- Internal gages will measure the largest diameter of any chamfer that has an included angle within the range of angles printed on the Dial face

- Gages are also available with electronic indicators on request

- Deluxe padded case

- All ground surfaces are of hardened tool steel

- Indicators are AGD design

- Gages directly measure the diameter of chamfered holes

- For 0 - 90° Dial reading